Alarmbord is spesiaal ontwerp vir Savgood Network Zoom Camera-modules.Dit kan die kamera se RS232-koppelvlak na RS485-koppelvlak omskakel.
Interfacebeskrywing:
| Tik | PIN nommer | PIN Naam | Beskrywing |
| J2 (Blokkeer kamera-koppelvlak) | 1 | UART1_TX | Kamerabeheerreekspoort TX |
| 2 | UART1_RX | Kamerabeheerreekspoort RX | |
| 3 | UART2_TX | Kamerareeks Port2 TX | |
| 4 | UART2_RX | Kamerareeks Port2 RX | |
| 5 | GND | GND | |
| 6 | +12V | DC12V | |
| J6 (Blokkeer kamera-koppelvlak) | 1 | NC | |
| 2 | GND | GND | |
| 3 | AUDIO_IN | Kamera Oudio In | |
| 4 | GND | GND | |
| 5 | AUDIO_UIT | Kamera Oudio Uit | |
| J4(Blokkeer kamera-koppelvlak) | 1 | ETHRX- | Netwerk RX- |
| 2 | ETHRX+ | Netwerk RX+ | |
| 3 | ETHTX- | Netwerk TX- | |
| 4 | ETHTX+ | Netwerk TX+ |
| Tik | PIN nommer | PIN Naam | Beskrywing |
| J3 | 1 | AUDIO_IN | Oudio in |
| 2 | AUDIO_UIT | Oudio-uitvoer | |
| 3 | GND | GND | |
| 4 | ALARM_IN | Alarm in | |
| 5 | ALARM_UIT | Alarm uit | |
| 6 | ALARM_OUT_TC | Alarm uit TC | |
| 7 | GND | GND | |
| 8 | RS485+ | PT Control, RS485+, Pelco | |
| 9 | RS485- | PT Control, RS485-, Pelco | |
| 10 | GND | GND | |
| 11 | CVBS_OUT | CVBS Uit | |
| 12 | GND | GND |
| Tik | PIN nommer | PIN Naam | Beskrywing |
| J5 | 1 | +12V_IN | DC 12V + In |
| 2 | GND | GND | |
| 3 | NC | ||
| 4 | NC | ||
| 5 | ETHTX+ | Netwerk RX- | |
| 6 | ETHTX- | Netwerk RX+ | |
| 7 | ETHRX+ | Netwerk TX- | |
| 8 | ETHRX- | Netwerk TX+ |
| Tik | PIN nommer | PIN Naam | Beskrywing |
| J19(Skakel in) | 1 | +12V_IN | DC 12V + In |
| 2 | GND | GND |
| Tik | PIN nommer | PIN Naam | Beskrywing |
| J10(PT Control Series Port) | 1 | GND | GND |
| 2 | SD_UART_RX | RS232 RX, Visca-protokol | |
| 3 | SD_UART_TX | RS232 TX, Visca-protokol | |
| 4 | +3,3V | 3.3V uit |
